Cheat Sheets

Manchmal ist es gar nicht so leicht die richtigen Einstellungen für einen 3D Druck zu finden. Wir wollen das verbessern, daher haben wir eine Liste mit gängigen 3D Druckern zusammengestellt und unsere empfohlenen Druckeinstellungen für PrintaMent auf diesen 3D Druckern.

PrintaMent PLA

 Printing TBed TemperaturePrinting SpeedFan Speed 2nd LayerFlow Rate
BCN3D Sigma195°-220°Coff* | >65°CUp to 70 mm/s100%100%
Ultimaker 2195°-220°Coff* | >65°CUp to 80 mm/s100%100%
Ultimaker 2+195°-220°Coff* | >65°CUp to 80 mm/s100%100%
Ultimaker 3195°-220°Coff* | >65°CUp to 80 mm/s100%100%
BQ Wittbox 1190°-215°Cn.A.*Up to 60 mm/s100%100%
BQ Wittbox 2190°-215°Cn.A.*Up to 60 mm/s100%100%
BQ Hephestos190°-215°Cn.A.*Up to 60 mm/s100%100%
Prusa i3190°-215°Coff* | >65°CUp to 60 mm/s100%100%
Prusa i3 MK2190°-215°Coff* | >65°CUp to 60 mm/s100%100%

*coated with PrintaFix

PrintaMent PET-G

 Printing TemperatureBed TemperaturePrinting SpeedFan Speed 2nd LayerFlow Rate
BCN3D Sigma240°-250°C65°-70°C*Up to 50 mm/s50%104%
Ultimaker 2240°-250°C65°-70°C*Up to 60 mm/s50%104%
Ultimaker 2+240°-250°C65°-70°C*Up to 60 mm/s50%104%
Ultimaker 3240°-250°C65°-70°C*Up to 60 mm/s50%104%
BQ Wittbox 1n.A.n.A.n.A.n.A.n.A.
BQ Wittbox 2n.A.n.A.n.A.n.A.n.A.
BQ Hephestosn.A.n.A.n.A.n.A.n.A.
Prusa i3220°-240°C65°-70°C*Up to 50 mm/s50%104%
Prusa i3 MK2220°-240°C65°-70°C*Up to 50 mm/s50%104%

*coated with PrintaFix

PrintaMent PURE

We recommend to use a harden nozzle with a minimum of 0,5mm.

 Printing TemperatureBed TemperaturePrinting SpeedFan Speed 2nd LayerFlow RateRetraction
BCN3D Sigma200°-215°Coff* | 65°CUp to 35 mm/s35%103%4,4mm
Ultimaker 2200°-215°Coff* | 65°CUp to 35 mm/s35%103%4,4mm
Ultimaker 2+200°-215°Coff* | 65°CUp to 35 mm/s35%103%4,4mm
Ultimaker 3200°-215°Coff* | 65°CUp to 35 mm/s35%103%4,4mm
BQ Witbox 1195°-210°Cn.A.*Up to 30 mm/s35%103%1,7mm
BQ Witbox 2195°-210°Cn.A.*Up to 30 mm/s35%103%1,7mm
BQ Hephestos195°-210°Cn.A.*Up to 30 mm/s35%103%1,7mm
Prusa i3195°-210°Coff* | 65°C*Up to 30 mm/s35%103%1,7mm
Prusa i3 MK2195°-210°Coff* | 65°CUp to 35 mm/s35%103%1,7mm

*coated with PrintaFix

PrintaMent M-ABS

 Printing TemperatureBed TemperaturePrinting SpeedFan Speed 2nd LayerFlow Rate
BCN3D Sigma230°-250°C65°C*Up to 45 mm/s20%100%
Ultimaker 2230°-250°C65°C*Up to 50 mm/s20%100%
Ultimaker 2+230°-250°C65°C*Up to 50 mm/s20%100%
Ultimaker 3230°-250°C65°C*Up to 50 mm/s20%100%
BQ Wittbox 1225-245°Cn.A.**Up to 45 mm/s20%100%
BQ Wittbox 2225-245°Cn.A.**Up to 45 mm/s20%100%
BQ Hephestos225-245°Cn.A.**Up to 45 mm/s20%100%
Prusa i3225-245°C65°C*Up to 45 mm/s20%100%
Prusa i3 MK2225-245°C65°C*Up to 45 mm/s20%100%

*coated with PrintaFix
** we recommend to coat it with PrintaFix and use 20 perimeters of Brim

PrintaMent METAL

We recommend to use a harden nozzle with a minimum of 0,5mm.

 Printing TemperatureBed TemperaturePrinting SpeedFan Speed 2nd LayerFlow RateRetraction
BCN3D Sigma195°-220°Coff* | 65°CUp to 45 mm/s100%102%4,4mm
Ultimaker 2195°-220°Coff* | 65°CUp to 45 mm/s100%102%4,4mm
Ultimaker 2+195°-220°Coff* | 65°CUp to 45 mm/s100%102%4,4mm
Ultimaker 3195°-220°Coff* | 65°CUp to 45 mm/s100%102%4,4mm
BQ Wittbox 1190°-215°Cn.A.*Up to 40 mm/s100%102%1,6mm
BQ Wittbox 2190°-215°Cn.A.*Up to 40 mm/s100%102%1,6mm
BQ Hephestos190°-215°Cn.A.*Up to 40 mm/s100%102%1,6mm
Prusa i3190°-215°Coff* | 65°CUp to 45 mm/s100%102%1,6mm
Prusa i3 MK2190°-215°Coff* | 65°CUp to 45 mm/s100%102%1,6mm

*coated with PrintaFix

PrintaMent WOOD

We recommend to use a harden nozzle with a minimum of 0,5mm.

 Printing TemperatureBed TemperaturePrinting SpeedFan Speed 2nd LayerFlow RateRetraction
BCN3D Sigma205°-220°Coff* | 65°CUp to 35 mm/s35%103%4,4mm
Ultimaker 2205°-220°Coff* | 65°CUp to 35 mm/s35%103%4,4mm
Ultimaker 2+205°-220°Coff* | 65°CUp to 35 mm/s35%103%4,4mm
Ultimaker 3205°-220°Coff* | 65°CUp to 35 mm/s35%103%4,4mm
BQ Witbox 1200°-215°Cn.A.*Up to 30 mm/s35%103%1,7mm
BQ Witbox 2200°-215°Cn.A.*Up to 30 mm/s35%103%1,7mm
BQ Hephestos200°-215°Cn.A.*Up to 30 mm/s35%103%1,7mm
Prusa i3200°-215°Coff* | 65°C*Up to 30 mm/s35%103%1,7mm
Prusa i3 MK2200°-215°Coff* | 65°CUp to 35 mm/s35%103%1,7mm

*coated with PrintaFix

PrintaMent PET-G CF20

We recommend to use a harden nozzle with a minimum of 0,5mm.

 Printing TemperatureBed TemperaturePrinting SpeedFan Speed 2nd LayerFlow RateRetraction
BCN3D Sigma245°-260°C65°-70°C*Up to 45 mm/s50%100%4,4mm
Ultimaker 2245°-260°C65°-70°C*Up to 45 mm/s50%100%4,4mm
Ultimaker 2+245°-260°C65°-70°C*Up to 45 mm/s50%100%4,4mm
Ultimaker 3245°-260°C65°-70°C*Up to 45 mm/s50%100%4,4mm
BQ Wittbox 1n.A.n.A.n.A.n.A.n.A.n.A.
BQ Wittbox 2n.A.n.A.n.A.n.A.n.A.n.A.
BQ Hephestosn.A.n.A.n.A.n.A.n.A.n.A.
Prusa i3220°-240°C65°-70°C*Up to 40 mm/s50%100%1,6mm
Prusa i3 MK2220°-240°C65°-70°C*Up to 45 mm/s50%100%1,6mm

*coated with PrintaFix

PrintaMent PVA-M

 Printing TemperatureBed TemperaturePrinting SpeedFan Speed 2nd LayerFlow Rate
BCN3D Sigma190°-210°C>55°C*Up to 30 mm/s70%105%
Ultimaker 2n.A.n.A.n.A.n.A.n.A.
Ultimaker 2+n.A.n.A.n.A.n.A.n.A.
Ultimaker 3190°-210°C>55°C*Up to 30 mm/s70%105%
BQ Wittbox 1n.A.n.A.n.A.n.A.n.A.
BQ Wittbox 2n.A.n.A.n.A.n.A.n.A.
BQ Hephestosn.A.n.A.n.A.n.A.n.A.
Prusa i3n.A.n.A.n.A.n.A.n.A.
Prusa i3 MK2n.A.n.A.n.A.n.A.n.A.

*coated with PrintaFix

PrintaMent HIPS

 Printing TemperatureBed TemperaturePrinting SpeedFan Speed 2nd LayerFlow Rate
BCN3D Sigma240°-270°C90°-110°CUp to 40 mm/s50%100%
Ultimaker 2240°-270°C90°-110°CUp to 45 mm/s50%100%
Ultimaker 2+240°-270°C90°-110°CUp to 45 mm/s50%100%
Ultimaker 3240°-270°C90°-110°CUp to 45 mm/s50%100%
BQ Wittbox 1n.A.n.A.n.A.n.A.n.A.
BQ Wittbox 2n.A.n.A.n.A.n.A.n.A.
BQ Hephestosn.A.n.A.n.A.n.A.n.A.
Prusa i3225°-245°C90°-110°CUp to 45 mm/s50%100%
Prusa i3 MK2225-245°C90°-110°CUp to 45 mm/s50%100%

PrintaMent PC-ABS

 Printing TemperatureBed TemperaturePrinting SpeedFan Speed 2nd LayerFlow Rate
BCN3D Sigma275°-285°C85°-95°C*Up to 50 mm/smax. 5%103%
Ultimaker 2275°-285°C85°-95°C*Up to 50 mm/smax. 5%103%
Ultimaker 2+275°-285°C85°-95°C*Up to 50 mm/smax. 5%103%
Ultimaker 3275°-285°C85°-95°C*Up to 50 mm/smax. 5%103%
BQ Wittbox 1n.A.n.A.n.A.n.A.n.A.
BQ Wittbox 2n.A.n.A.n.A.n.A.n.A.
BQ Hephestosn.A.n.A.n.A.n.A.n.A.
Prusa i3250°-265°C85°-95°C*Up to 50 mm/smax. 5%102%
Prusa i3 MK2250°-265°C85°-95°C*Up to 50 mm/smax. 5%102%

*coated with UHU Stick or 3DLac
**works best with a freshly cleaned PEI surface

PrintaMent PC-ABS flame retardant

 Printing TemperatureBed TemperaturePrinting SpeedFan Speed 2nd LayerFlow Rate
BCN3D Sigma280°-290°C85°-95°C*Up to 50 mm/smax. 5%101%
Ultimaker 2280°-290°C85°-95°C*Up to 50 mm/smax. 5%101%
Ultimaker 2+280°-290°C85°-95°C*Up to 50 mm/smax. 5%101%
Ultimaker 3280°-290°C85°-95°C*Up to 50 mm/smax. 5%101%
BQ Wittbox 1n.A.n.A.n.A.n.A.n.A.
BQ Wittbox 2n.A.n.A.n.A.n.A.n.A.
BQ Hephestosn.A.n.A.n.A.n.A.n.A.
Prusa i3260°-270°C85°-95°C*Up to 50 mm/smax. 5%101%
Prusa i3 MK2260°-270°C85°-95°C**Up to 50 mm/smax. 5%101%

*coated with UHU Stick or 3DLac
**works best with a freshly cleaned PEI surface

PrintaMent PC

 Printing TemperatureBed TemperaturePrinting SpeedFan Speed 2nd LayerFlow Rate
BCN3D Sigma280°-290°C100°-105°C*Up to 50 mm/s0%-10%100%
Ultimaker 2280°-290°C100°-105°C*Up to 50 mm/s0%-10%100%
Ultimaker 2+280°-290°C100°-105°C*Up to 50 mm/s0%-10%100%
Ultimaker 3280°-290°C100°-105°C*Up to 50 mm/s0%-10%100%
BQ Wittbox 1n.A.n.A.n.A.n.A.100%
BQ Wittbox 2n.A.n.A.n.A.n.A.100%
BQ Hephestosn.A.n.A.n.A.n.A.100%
Prusa i3270°-280°C100°-105°C*Up to 45 mm/s0%-10%100%
Prusa i3 MK2270°-280°C100°-105°C*Up to 45 mm/s0%-10%100%

*coated with UHU Stick or 3DLac

PrintaMent SEMIFLEX

 Printing TemperatureBed TemperaturePrinting SpeedFan Speed 2nd LayerFlow Rate
BCN3D Sigma240°-250°C85°-95°C**Up to 45 mm/s40%100%
Ultimaker 2240°-250°C85°-90°C*Up to 45 mm/s40%100%
Ultimaker 2+240°-250°C85°-95°C*Up to 45 mm/s40%100%
Ultimaker 3240°-250°C85°-95°C*Up to 45 mm/s40%100%
BQ Wittbox 1n.A.n.A.n.A.n.A.n.A.
BQ Wittbox 2n.A.n.A.n.A.n.A.n.A.
BQ Hephestosn.A.n.A.n.A.n.A.n.A.
Prusa i3235°-245°C85°-95°C*Up to 50 mm/s40%100%
Prusa i3 MK2235°-245°C85°-95°C*Up to 50 mm/s40%100%

*coated with UHU Stick or 3DLac

Menü