Weak infill

Weak infill

This problem occurs, when your infill has too weak strings and is not strong enough to support the outer shells. In that case the whole print gets low strength. Other infill pattern, more infill and a lower infill print speed can be used to eliminate this problem. A clogged nozzle can also be the problem.

There are a few things you can do against a weak infill:

When a bad infill or weak infill is detected, the material may be not able to get melted that fast. Try to decrease the printing speed to get a solid infill with enough plastic to support the outer shells and see if the problem is fixed.

Menü