Isopropanol or 2-Propanol is a clear powerful cleaning agent for 3D Printing parts, buildplates and generall applicatons.
Isopropanol for build plates
Isopropanol is effective in cleaning the 3D printer buildplate and leaves no trace or residue. To work it can be diluted down to a 70% Isopropanol and 30% distilled water. For its maximum potential it can also be used to concentrated.
Isopropanol for SLA and DLP Prints
Isopropanol removes and disolves uncured resin form DPL and SLA prints and can be used to clean finished DLP and SLA 3D printed parts. Due to its quick evaporation it drys quickly. Therefor the container should not be open for longer than necessary.
Hazard and precautionary statements
Danger: Highly flammable liquid and vapor; Causes serious eye irritation; May cause drowsiness or dizziness; Keep away from heat/sparks/open flames/hot surfaces. No smoking; Avoid breathing vapors IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.