PrintaMent PVA-HT


300g | support material that can withstand High Temperatures
Applications: support structures

  • 1,75mm
  • 2,85mm
SKU: N/A Category:


PVA-HT is a specially developed water soluble solution for dual extrusion when you need to print with styrene based materials. It dissolves slightly slower than regular PVA and it is advised to dissolve in luke-warm water, preferably in circulated water. PVA-HT can handle higher nozzle temperatures (<250°C) without the risk of cross linking and clogging the nozzle.

Recommended printsettings

  • Printing Temperature: 190-220°C
  • Heated Bed:  >55°C
  • Enclosure: not required
  • Adhesion Agent: PrintaFix
  • Part Cooling Fan: 50%
  • Nozzle: standard brass
  • Printspeed: up to 30mm/s
  • Layer height: >0.1mm
  • Flow Rate: 100%

Cheat sheets with narrow settings for major 3D printer are provided in the manual section >

Alternative filament: PVA-M | HIPS

Additional information

Weight700 g

1,75mm, 2,85mm